How to install an Outside tap. DIY tap installation. DIY Plumbing #diy #plumber #plumbing

Installing an outside tap is a fantastic way to make your gardening and outdoor chores much easier. Whether you're a seasoned plumber or just a DIY enthusiast looking to tackle your first plumbing project, this guide will help you understand the basics of outside tap installation. First off, let’s talk about the materials you'll need. You'll require a standard outside tap kit, which usually comes with all necessary fittings. Don’t forget to get some Teflon tape, a spade, and a drill. In case the weather is chilly, consider using insulation for your pipes, which can protect against freezing in winter months. Start by choosing the perfect location for your tap. The ideal spot is close to an indoor water supply and free from obstructions. Once you’ve picked your site, it’s time to drill through the wall. Make a hole big enough for the pipe to pass through, remembering to angle down towards the outside to ensure any water drains away from the wall. Next, attach your tap to the pipe that will be going inside. Secure it with nuts and fittings as shown in the video. Make sure to use Teflon tape on the threads to prevent any leaks. Once you’re done with the fittings, it’s time to connect the tap to the water supply inside your home. This is where things can get a bit tricky, especially if you’re doing it for the first time, but just follow along with the video and you'll be fine. A quick tip: before you finalize everything, turn the water supply back on and check for leaks. It's much better to fix things while you're still in that troubleshooting stage. After everything checks out, you can now enjoy the convenience of your new outside tap for watering your garden or washing your car. With a little patience and practice, you'll not only save money but also gain the satisfaction of having completed a DIY project successfully. So why not roll up your sleeves and get that tap installed? Happy plumbing!