Ideal Logic / Vogue No Hot Water - How To Test - Plumber

If you’re a plumber, DIYer, or just a curious homeowner facing the dreaded issue of no hot water from your Ideal Logic or Vogue boiler, you’re in the right place. Let’s dig into how you can troubleshoot this common problem and bring that much-needed warmth back to your taps. First things first, if your boiler isn’t producing hot water, the first thing you should do is check the pressure gauge. Ideally, it should be sitting between 1 and 1.5 bar. If it’s too low, you may need to top up the system. A simple lever or filling loop will do the trick — just make sure you don’t overdo it. Another thing to consider is the thermostat settings. Sometimes it’s just a case of an incorrect setting or a timer not working properly. Double-check that your thermostat is set to a comfortable temperature. If it’s still not heating up, there may be an issue with the thermostat itself that needs addressing. Don’t forget to check the diverter valve, an important component that directs hot water to your taps and central heating. If it’s stuck or faulty, water may not flow as it should. In some cases, it may simply need to be cleaned or replaced. Finally, there’s the possibility of an error code flashing on your boiler display. Ideal Logic and Vogue boilers are pretty user-friendly, so refer to your manual to decipher what those codes mean. They can often give you a clear indication of what’s gone wrong. Whether you're a seasoned plumber or just starting out, knowing how to diagnose and fix common boiler issues can save you and your clients from chilly showers. For more detailed explanations and practical demonstrations, check out our video for step-by-step guidance. Now, let’s get you back to enjoying consistent hot water in no time!